Again, as the artists' designs must necessarily be reproduced for this purpose, he should never lose sight of the material he is designing for. Lack of precision is fatal (to take up again what I have just advanced) in an art produced by the point of the graver on a material which offers just the amount of resistance which helps precision. And here I come to a very important part of my subject, to wit, the relation between the designer and the wood-engraver; and it is clear that if these two artists do not understand one another, the result must be failure; and this understanding can never exist if the wood-engraver has but to cut servilely what the artist draws carelessly. If any real school of wood-engraving is to exist again, the wood-cutter must be an artist translating the designer's drawing. It is quite pitiable to see the patience and ingenuity of such clever workmen, as some modern wood-cutters are, thrown away on the literal reproduction of mere meaningless scrawls. The want of logic in artists who will insist on such work is really appalling. It is the actual touches of the hand that give the speciality, the final finish to a work of art, which carries out in one material what is designed in another; and for the designer to ignore the instrument and material by which the touches are to be done, shows complete want of understanding of the scope of reproducible design. I cannot help thinking that it would be a good thing for artists who consider designing a part of their province (I admit there are very few such artists) to learn the art of wood-engraving, which, up to a certain point, is a far from difficult art; at any rate for those who have the kind of eyes suitable for the work. I do not mean that they should necessarily always cut their own designs, but that they should be able to cut them. They would then learn what the real capacities of the art are, and would, I should hope, give the executing artists genuine designs to execute, rather than problems to solve. I do not know if it is necessary to remind you that the difficulties in cutting a simple design on wood (and I repeat that all designs for book illustrations should be simple) are very much decreased since the fifteenth century, whereas instead of using the knife on the plank section of the wood, we now use the graver on the end section. Perhaps, indeed, some of you may think this simple wood-cutting contemptible, because of its ease; but delicacy and refinement of execution are always necessary in producing a line, and this is not easy, nay it is not possible to those who have not got the due instinct for it; mere mechanical deftness is no substitute for this instinct.