On this scale, the higher numbers are the harder minerals. Mohs is a relative, not an absolute scale. Therefore, it should not be assumed that diamond is ten times harder than talc because actually diamond is very many tens of times harder than talc. However, a particular mineral is harder than any other mineral with a lesser number, and the scale is very convenient to use. Gemstones mounted in rings should have a hardness of at least seven on the Mohs scale, or the stones may become scuffed and scratched after a relatively short period of wear. Gemstones mounted in pins and brooches can be of softer material as they are not usually subjected to abrasion and rough treatment. The tendency of some minerals to split with relative ease in particular directions along planes is called cleavage. Cleavage is also a factor determining the durability of gemstones. Some gemstones do not exhibit this tendency at all, whereas others cleave in several directions. The number of cleavages is always the same in any one mineral, and the direction of cleavages is constant in relation to the crystal structure of any one mineral or gemstone. It is apparent that of stones having the same hardness, the ones lacking cleavage or having the lesser number of good cleavage directions are the most durable. Some stones, such as jade and agate, owe their durability to their compact fibrous structure, which makes them very tough and durable even though they are not especially hard. Several other properties of gemstones, although not always contributing to the beauty or desirability of gemstones, are useful in identifying uncut specimens. Streak is the color of the mineral when finely powdered or, for softer minerals, the color obtained by rubbing the mineral against a piece of unglazed porcelain or tile. The color of a mineral’s streak is commonly different from the unpowdered specimen. Fracture is the kind of surface obtained when the mineral is broken in a direction that is not a cleavage direction. Fracture surfaces are described by such terms as conchoidal (like the fracture of glass), subconchoidal, splintery, even, and uneven. Tenacity is the resistance of a mineral to breakage. Brittle minerals break relatively easily on impact. Malleable minerals, such as gold, may be flattened under a hammer into very thin sheets without breaking. Sectile minerals may be cut with a knife without powdering. Most gemstones, even diamond, are brittle. It is only natural to value most those gemstones that are not common or easy to obtain. Emerald owes its longstanding popularity to its fine green color, but tourmaline is sometimes found in colors that very closely approach that of emerald and yet sells for considerably less because it is so much more common.