precise manner in which the operations of mechanical energy are limited by the mass will now be clear. The principle is quite general, and applicable to all moving bodies. Mass is ever a direct measure of energy capacity. A graphical method of representing energy transformations of this kind, by a system of co-ordinates, would enable the reader to appreciate more fully the quantitative relations of the forms of energy involved and also their various limits. 21. _The Simple Pendulum_ The remaining operations of transformation for discussion are embodied in the following simple apparatus. A spherical metallic mass M (Fig. 2) is supported by a rod P which is rigidly connected to a horizontal spindle HS as shown. [Illustration: FIG. 2] The spindle is supported and free to revolve in the bearings B{1} and B{2} which form part of the supporting framework V resting on the ground; the bearing surfaces at B{1} and B{2} are lubricated, and the mass M is free to perform, in a vertical plane, complete revolutions about the axis through the centre of the spindle. In carrying out this motion its path will be circular, as shown at DCFE; the whole arrangement is merely an adaptation of the simple pendulum. As constituted, the apparatus may form the seat of certain energy operations. Some of these will only take place with the application of energy of motion to the pendulum from an external source, thereby causing it to vibrate or to rotate: others, again, might be said to be inherent to the apparatus, since they arise naturally from its construction and configuration. We shall deal with the latter first. 22. _Statical Energy Conditions_