Clay lumps of varying sizes—evidently ground up sherds are visible in the paste of most sherds, and 39 of the 141 brushed sherds also contain bone tempering. There are particles of sand in all the sherds, a few having so much that their surfaces have a distinctly sandy feel when rubbed between the fingers. Paste colors range from creams and buffs to fairly dark grays, with most sherds falling into the lighter shades of buff, brown, and gray—indicative of oxidation during firing. Some sherds have light exterior surfaces and dark interior surfaces, suggesting that the vessels stood upside down during firing. Most of the brushed sherds could not be definitely identified with any specific pottery types; however, several sherds were assigned to the types Bullard Brushed of the Frankston Focus (Suhm _et al._, 1954: 252 and Pl. 9) and Pease Brushed-Incised of the Bossier Focus (Webb, 1948: 110-113 and Pls. 11 & 12; Suhm _et al._, 1954: 338 and Pl. 53). There are 17 Bullard Brushed sherds, 13 of them from the body of a single vessel, the other four from the rim of another vessel (Fig. 13, A-B). All were found at Mound C. Both vessels were barrel-shaped with a slight, evenly curved constriction in the neck area. There were one or more horizontal rows of punctations made with a blunt stick separating the body area from the rim area on both vessels, but there was no angle at the juncture of the body and the rim. On the vessel represented only by body sherds, the brushing consisted of short, overlapping strokes in random directions, creating a roughened exterior of uneven appearance. The rim treatment of this vessel could not be determined. The other Bullard Brushed vessel was represented by four rimsherds which fitted together. The rim of this vessel curved outwardly and was evenly brushed in a diagonal direction. A horizontal row of punctations appeared at the bottom of the rim. Both Bullard vessels were relatively large with wide mouths. Six of the brushed body sherds (Fig. 13, C, D, G) were identified as type Pease Brushed-Incised because they have vertically brushed sections separated by vertical appliqué strips. Five are from Mound D, the other from Mound A. Five of the six have closely spaced punctations or indentations pressed into the strips. One of the Pease body sherds (Fig. 13, D) is attached to a portion of the rim which is brushed horizontally. On this sherd there is a marked angle at the juncture of the body and the rim, and a horizontal row of small punctations made with the blunt end of a stick is impressed along the line of the angle. Other Pease sherds with incising instead of brushing are described later.