The Microscope. Its History, Construction, and Application 15th ed.: Being a familiar introduction to the use of the instrument, and the study of microscopical scienceHogg, Jabez
History
The Microscope. Its History, Construction, and Application 15th ed.: Being a familiar introduction to the use of the instrument, and the study of microscopical science
Hogg, Jabez
Microscopy; Natural history
In 1814, Fräunhofer,[35] a German optician, discovered these lines
quite independently, and mapped out 576 of them, calling the more
prominent of them A, B, C, D, E, F, G, H, which lines he used as marks
of comparison. He also found that the distances of these lines from
each other may vary according to the nature of the substance composing
the prism; thus, their relative distances are not the same in prisms
of flint-glass, crown-glass, and bisulphide of carbon, but they always
occupy the same position relatively to the colours of the spectrum.
Kirschoff and Angström had mapped out in 1880 no less a number than
2,000 Fräunhofer lines, a portion of which are correctly shown in the
accompanying chart (Fig. 191).
In 1830, Simms, a London optician, made an improvement in the
construction of the spectroscope by placing a lens in front of the
prism, so arranged that the slit was in the focus of the lens. This
lens turns the light, after it has passed through the slit, into
a cylindrical beam before entering the prism. Another lens, also
introduced by him, receives the circular beam emerging from the prism,
and compels it to throw an image of the slit, which may be magnified
at pleasure for each ray. The lens between the prism and the slit is
termed the _collimating_ lens. Thus the following are the essential
parts of a chemical spectroscope:--(1) a slit, the edges of which are
two knife-edges of steel very truly ground, and exactly parallel to
each other, and in a direction parallel to the refracting edge of the
prism, to admit a pencil of rays. (2) A collimating lens; a convex
lens with the slit at its principal focus, which renders the rays
parallel before entering the prism. (3) A prism of dense glass, in
which the rays are refracted and dispersed. (4) An observing telescope
constructed like an astronomical refractor of small size, and placed so
that the rays shall traverse it after emerging from the prism. Such are
the essentials of a one-prism chemical spectroscope.
The form of instrument in use with the microscope is the “_direct
vision_” spectroscope, consisting of two prisms of flint-glass, placed
between three of crown-glass cemented together by Canada balsam; the
spectrum being viewed directly by the eye. The earliest constructed
form of micro-spectroscope is shown in Fig. 192, the Browning-Huggins.
It was, however, Mr. Sorby who suggested that the prism should be
made of dense flint-glass and of such a form that it could be used
in two different positions, and that in one it should give twice the
dispersion that it would in the other, but that the angle made by the
incident and emergent rays should be the same in both positions.
[Illustration: Fig. 192.--The Browning-Huggins Micro-spectroscope.]
[Illustration: Fig. 193.]
[Illustration: Fig. 193_a_.]
Figs. 193 and 193_a_ represent prisms of the kind arranged to use in
two different positions, i and i′ being the same angle as I and I′.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Elsewhere in the archive
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account