The Useful Arts Employed in the Construction of Dwelling Houses. Second Edition — John Shaqi
The Useful Arts Employed in the Construction of Dwelling Houses. Second EditionAnonymous
History
The Useful Arts Employed in the Construction of Dwelling Houses. Second Edition
Anonymous
Architecture, Domestic; Building materials; Dwellings -- Design and construction
When the holes are to be made to a greater depth than about
thirty inches, it is common to use a chisel from six to eight feet
in length, pointed at both ends, having a bulbous part in the middle
for the convenience of holding it; it thus becomes a kind of double
jumper, and is used without a hammer, with either end put into the
hole at pleasure. The workmen holding this jumper by the bulbous part,
lift it, and allow it to drop into the hole by its own weight, and by
this simple operation, a hole to the depth of five feet and upwards
is perforated with ease and expedition. When the boring is completed,
the fragments are carefully removed, and the hole is made as dry as
possible, which is done by filling it partially with stiff clay, and
then driving into it a tapering iron rod, called the _claying bar_,
which nearly fills it. This, being forced in with great violence,
drives the clay into all the crevices of the rock, and secures the
dryness of the hole. Should this plan fail, tin cartridges are used:
these are furnished with a stem or tube, as shown in the following
figure, through which the powder may be ignited. When the hole is dry,
the powder is introduced, mixed sometimes with quicklime, which, it
is said, increases the force of the explosion. A long iron or copper
rod, called the _pricker_, is then inserted amongst the powder, and
is afterwards withdrawn, when the priming powder is introduced. The
hole is filled up with burnt clay, pounded brick, stone, or any other
substance not likely to produce a spark during the ramming. This is
called the _tamping_. In filling up the hole, the chief danger is the
production of a spark among the materials, a circumstance which has
occasioned the most fatal and distressing accidents to quarriers.
Prickers and rammers of copper, or of bronze, have been employed, but
their greater expense, and liability to twist and break, have prevented
their general introduction.
[Illustration]
The quarrier is, of course, accustomed to suppose that the more firmly
he rams in the powder, the greater will be the resulting effect. It
is, however, a curious property of sand, that it fills up all the void
spaces in the tube or hole, and for some rocks entirely supersedes the
necessity of ramming and pricking.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account