When the hole is fully charged with the powder and wadding, the pricker is withdrawn, and the small tubular space, or vent-hole, which it leaves, is sometimes filled up with powder; but, for the sake of economy, it is more common to insert straws filled with powder, and joined together, so as to reach the required depth. The lower straw is one terminating in the root part, where a natural obstruction occurs, or it is artificially stopped with clay to prevent the powder from being lost. The lower part of the priming straw is pared quite thin, so as to insure the inflammation of the charge of powder in the hole. Sometimes the fire is conveyed by means of the large and long green rushes, which grow in marshy ground. A slit is made in one side of the rush, along which the sharp end of a bit of stick is drawn, so as to extract the pith, when the skin of the rush closes again by its own elasticity. This tube is filled up with gunpowder; it is then dropped into the vent-hole, and made steady with a bit of clay. This being done, a slow match, called a _smift_, consisting generally of a bit of soft paper, prepared by dipping it into a solution of saltpetre, is carefully applied to the priming powder. When this match is about to be fired, the quarriers usually blow a horn or ring a bell, to give notice to all around them to retire. The explosion commonly takes place in about a minute; the priming first explodes, attended only with flame; a short interval of suspense commonly ensues; the eyes of the bystanders being anxiously directed towards the spot; the rock is instantly seen to open, when a sharp report or detonating noise takes place, and numerous fragments of stone are observed to spring into the air, and fly about in all directions, from amidst a cloud of smoke. The quarrier then returns with alacrity to the scene of his operations. [Illustration] The accompanying figure shows the plan of blasting the rock, and a section of the hole ready prepared for firing. The portion of the rock to be dislodged by the explosion is that included between A and B. The charge of powder is represented as filling the bore to C, from which point to the top, the hole is filled up with _tamping_. The _smift_ is represented at D. In the year 1831, a patent was taken out by Mr. Bickford, of Tucking Mill, Cornwall, for an invention called “the Miner’s Safety Fuse.” It consists essentially of a minute cylinder of gunpowder, or other suitable explosive mixture, inclosed within a hempen cord, which is first twisted in a peculiar kind of machine, then overlaid to strengthen it; afterwards it is varnished with a mixture of tar and resin to preserve the powder from moisture, and finally is coated with whitening to prevent the varnish from sticking to the fingers, or the fuses to one another. These fuses are said to have been used with good effect, and to have greatly diminished the number of accidents. The application of Electricity to the Blasting of Rocks.