In such a manner as this veneers are now cut from the timber in this country. But it is stated that the Russians have devised a very curious and effective method of cutting veneers, without the use of a saw, and without making any waste of material. It is a _planing_ machine, the action of which is so accurate, that veneers thin enough for the covering of books, and for lithographic and other engravings, have been produced; thus serving the place of paper. The operation is begun by placing the timber from which the leaf is to be cut upon a square axle, where it is revolved, and made circular by a turner’s gouge. The blade of a plane of highly-tempered steel, and rather longer than the cylinder of wood, is fixed at the extremity of a frame six or seven feet in length, in such a manner as to exert a constant pressure upon the cylinder, and pare off a sheet of equable thickness, which folds upon another cylinder like a roll of linen. The frame to which the blade is attached is moveable at its lower extremity, and by the action of a weight it depresses in proportion as the mass diminishes in substance. That this depression may be progressive and perfectly regular, the inventor has appended a regulator to the machine consisting of a flat brass plate, preserved in an inclined direction, upon which the frame descends as the regulator itself is advanced. The motion is communicated to the cylinder of wood by several cog-wheels, which are turned by a crank. One hundred feet in length of veneering may be cut by this machine in the space of three minutes. When veneers are produced by the action of circular saws, as is now almost universally the case in England, it is evident that both surfaces must be rough, from the marks of the serrated edge of the cutting instrument; and it is in this rough state that they are purchased by cabinet-makers or others who employ them in veneering articles of furniture. The operations which are then to be performed are, to bring the surface of the veneer to a tolerable level, to fix the veneer to the article of furniture, and to clean and polish it when so fixed. Supposing the top of a sideboard to be the article which is to be veneered. The workman cuts out a piece of veneer, a little larger than is actually required, to allow for waste; and then lays it flat on his work-bench. With a veneering plane--which is a small-sized plane, having an iron jagged with notches like the teeth of a very fine saw--he works steadily over the whole surface of the veneer, carrying the plane in the direction of the grain of the wood. The action of this plane-iron removes all the saw marks, which were irregular in their course, and gives instead of them a series of regular parallel channels from end to end of the piece of veneer; these channels are but small in depth, and their object is to retain the glue which is afterwards used in the process of veneering.