Three textile raw materials and their manufactureInternational Acceptance Bank
Science
Three textile raw materials and their manufacture
International Acceptance Bank
Textile fabrics; Textile fibers; Textile industry
As the slivers come out of the drier they are fed through a number
of gill boxes. The gill box is the first of a long series of drawing
operations. In this, and all the following stages of open drawing,
there are always several slivers being combined into one and drawn
out until the resulting sliver has about the same or a smaller
diameter than the ones fed into the machine. The principle of the
gill box is quite simple. Several slivers are fed in between rollers
revolving at a comparatively low rate of speed. As they pass through
they are flattened out over what is known as a faller. This is armed
with very fine close wire teeth which come up through the fibres
and the draft is imparted when the wool is taken off the faller by
a final pair of rollers which are revolving considerably faster.
The sheet of wool which emerges from these rollers is again passed
through a funnel and thereby condensed once more into a sliver.
This operation is repeated from two to four times, according to
the quality of the top desired, and the methods employed by the
particular mill.
[Illustration: _Gilling the top_]
Where very coarse long fibred wool is to be worked there is no
carding, and the wool is prepared by straightening the fibres into a
sliver through a series of gill-boxes.
At some point during the gilling process a slight amount of oil is
usually dropped onto the sliver, as this facilitates combing.
4. COMBING
[Sidenote: _Removes Short Fibres_]
The next operation, namely that of combing, is again simple when
viewed as the primitive manufacturing process. The old comber would
take a short length of sliver, hang it on a nail by tying one end
together and then proceed to comb out the short fibres much as one
may comb out the dead short hairs from a dog’s coat. Combing is
simply the removal from the sliver of the short fibres which would
not spin properly. These short fibres are known as noils and are the
waste product of top-making. The top is a continuous untwisted strand
of long wool fibres made parallel by the comb. (By long fibres we
mean fibres which are relatively long. Some tops consist of fibres
less than an inch and a half in length. In this case, which is very
infrequent, the noil would be even shorter.)
[Illustration: _The Noble Comb_]
[Sidenote: _Noils_]
Noils are sold either to woolen or knitting mills direct by the
top-maker, or else to a merchant who disposes of them.
[Sidenote: _The Noble Comb_]
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account