Water Supply: the Present Practice of Sinking and Boring Wells: With Geological Considerations and Examples of Wells ExecutedSpon, Ernest
Science
Water Supply: the Present Practice of Sinking and Boring Wells: With Geological Considerations and Examples of Wells Executed
Spon, Ernest
Boring; Water-supply; Wells
The transmission of water through a porous medium being so rapid, we may
easily understand why springs are thrown out on the side of a hill,
where the upper set of strata consist of chalk, sand, and other
permeable substances, whilst those lying beneath are composed of clay or
other retentive soils. The only difficulty, indeed, is to explain why
the water does not ooze out everywhere along the line of junction of the
two formations, so as to form one continuous land-soak, instead of a
few springs only, and these oftentimes far distant from each other. The
principal cause of such a concentration of the waters at a few points
is, first, the existence of inequalities in the upper surface of the
impermeable stratum, which lead the water, as valleys do on the external
surface of a country, into certain low levels and channels; and
secondly, the frequency of rents and fissures, which act as natural
drains. That the generality of springs owe their supply to the
atmosphere is evident from this, that they vary in the different seasons
of the year, becoming languid or entirely ceasing to flow after long
droughts, and being again replenished after a continuance of rain. Many
of them are probably indebted for the constancy and uniformity of their
volume to the great extent of the subterranean reservoirs with which
they communicate, and the time required for these to empty themselves by
percolation. Such a gradual and regulated discharge is exhibited, though
in a less perfect degree, in all great lakes, for these are not sensibly
affected in their levels by a sudden shower, but are only slightly
raised, and their channels of efflux, instead of being swollen suddenly
like the bed of a torrent, carry off the surplus water gradually.
An Artesian well, so called from the province of Artois, in France, is a
shaft sunk or bored through impermeable strata, until a water-bearing
stratum is tapped, when the water is forced upwards by the hydrostatic
pressure due to the superior level at which the rain-water was received.
Among the causes of the failure of Artesian wells, we may mention those
numerous rents and faults which abound in some rocks, and the deep
ravines and valleys by which many countries are traversed; for when
these natural lines of drainage exist, there remains only a small
quantity of water to escape by artificial issues. We are also liable to
be baffled by the great thickness either of porous or impervious strata,
or by the dip of the beds, which may carry off the waters from adjoining
high lands to some trough in an opposite direction,--as when the borings
are made at the foot of an escarpment where the strata incline inwards,
or in a direction opposite to the face of the cliffs.
[Illustration: Effect of Strata on Artesian Well.
Fig. 1.]
[Illustration: Effect of a Fault.
Fig. 2.]
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account