The whole process is then repeated: that is, twelve more threads are wound between each pair of prongs in each of three directions, as aforesaid, making a total of 24 threads extending between each pair of prongs. If a heavier mat is desired, another layer of twelve threads may be added. When all this has been done, the thread may be tied to the final prong and then cut off. The frame is now ready to be sewed. This is where the shuttle is put into use. As much thread as can be conveniently held by the shuttle is wound upon it, and a foot or so allowed to hang from it. This loose end of the thread is then tied around a corner intersection of three groups of threads on the frame, from the back, and fastened securely. If you will now study Figure 3, you will find that it is possible to make three distinct loops around these intersections and to tie them from the back of the frame by means of half-hitches. As each one of these intersections is sewed or tied, the craftsman should move clockwise to the next intersection of three groups of threads and repeat the operation around the frame. When the first round has been completed, skip over to the second round and repeat at the end of each round: in this way it will be found unnecessary to break the thread at any time. In fact, the only time that it should be necessary to tie a knot in the thread is when the shuttle is empty. The proper procedure then, is to refill the shuttle and tie the new end to the end of the thread finished and continue sewing. When the entire frame has been tied, the finished article is removed by simply cutting through the thread as near to the prongs as is possible, with a pair of sharp scissors. Comb out the fringe thus formed and trim evenly. [Illustration: Frame wound to illustrate one step in winding frame for design suitable for pillow case or vanity set.] [Illustration: Frame wound to illustrate another step in winding frame for design suitable for pillow case or vanity set.] [Illustration: Frame completely wound—for twelve-petal daisy design. (This illustration shows frame extended for buffet or vanity set centerpieces—or centerpieces for luncheon set.)] _SPEED-O-WEAVE_ FRAME [Illustration: _SPEED-O-WEAVE_ FRAME] [Illustration: The Lily SPEED-O-WEAVE frame is packed in a box—complete with adjusting bolts and shuttle. (Shuttle is pictured at right). Frame consists of six angular sections, each section being provided with a plurality of prongs or fingers adapted to hold the threads. The sections are provided with holes through which bolts, secured by wing nuts, are extended to hold the several sections together.] [Illustration: The frame is assembled from six pieces of angle steel, light, sturdy, easily adjusted to various sizes ... green lacquer finish. Complete with adjusting bolts and shuttle. Adjustable To 20 Shapes]