Railway Construction — John Stuart Mill — John Shaqi
Railway Construction
John Stuart Mill · en
In tunnels of any length it is usual, where possible, to construct
shafts extending from the surface of the ground overhead down to the
tunnel below. These shafts serve the double purpose of enabling the
excavation to be carried on at an increased number of faces, and act
as permanent ventilators after completion. In some cases the shafts
are sunk exactly over the centre line of the tunnel, in others a few
yards away from the centre line. The latter arrangement, if not quite
so convenient for hoisting material while carrying on the excavations,
has certainly the great after advantage that anything falling or
maliciously thrown down the shaft cannot strike a passing train. The
short side-gallery, or space between the tunnel and the shaft,
provides a good refuge for workmen employed in repairs, and a
convenient site for storing a few materials advisable to keep on hand.
Occasionally favourable opportunities present themselves for making
horizontal shafts. For a portion of its length the tunnel may be
located at no very great distance from the precipitous sides of some
deep mountain ravine, or run near to the cliffs on the sea-coast, and
advantage can be taken to drive a lateral heading or gallery through
which the material from the tunnel excavation may be conveyed and
thrown out into the gorge or seashore below.
In many cases the surface of the ground rises so abruptly from the
faces of the tunnel and ascends to so great a height, that shafts of
any kind are entirely out of the question, and the whole of the work
must be carried on from the two ends. The rate of progress is
consequently much slower, and the ventilation more difficult. In a
shaftless tunnel of considerable length, and with a frequent train
service, the question of providing suitable appliances for promoting
artificial ventilation is of the utmost importance.