Pine bark, from _Pinas abies_, is one of the staple materials of the Continent. It contains up to 14 per cent. of a catechol tan, and, unlike most of this group, contains a high proportion of sugar and will give good results alone. Hemlock bark has been the staple tanning material of North America. It is obtained from the hemlock, or _Pinus canadensis_. It contains up to 11 per cent. of tan and much phlobaphene, and yields a characteristic red leather of good quality, but which rapidly darkens with sunlight. It contains some sugar, but is usually employed in conjunction with sulphuric acid or with sugary materials. Mallet bark yields another catechol tan similar to that of mimosa, but somewhat less astringent and more yellow in colour. Quebracho wood and mangrove bark have been used, but are now made into extracts. =Leaching.=--Whatever class of leather is being made, and whatever blend of tanning materials is being employed, the tannins must be efficiently extracted by water in order to make the tanning liquors. This process is called "leaching." The tanning materials, after being ground, crushed or shredded, are placed in large pits arranged in "rounds," "sets," or "batteries" of 6, 8 or 10 units, through which water is percolated systematically, so as to secure a continuous extraction. Water itself is added to only one of the pits of material. The liquor produced is passed on to the next pit, and then to the next, and is continually gathering strength. After passing thus through the series, the liquor becomes the source of the strong extracted tan liquors which are used in the tannery proper. With this system the stronger leach liquors are being acted upon by fresh material, and the nearly "spent" material is being acted on by the weakest liquors, and finally by water, thus ensuring a complete extraction. In the press leach system, which is now practically universal, the bottom of one pit communicates with the top of the next, and the liquor presses round by gravity flow caused by a few inches "fall." Liquor is thus constantly percolating downward through the material in each pit. The "head leach" and "tail leach" are always adjacent in a double row of pits, and when the material in the latter is quite spent, it is "cast," and the pit is filled with fresh material. The liquor is then pressed round into this pit by adding water to the tail leach. Hot water is used to secure better diffusion. At least two such sets of leaches ("taps" and "spenders") are necessary to spend the material of the average tannery and to obtain liquors of the necessary strength.