The less the spit is made to pass through the prime part of the meat, the better. Thus, in a shoulder of mutton, the spit is made to enter close to the shank-bone, and passed along the blade-bone of the joint. When the meat is nearly sufficiently roasted, it is dusted over with a coating of flour; this, uniting with the fat and other juices exuded on the surface, covers the joint with a brown crust, glazed and frothy, which gives to the eye a prelude of the palatable substance it encrusts. The process, as just described, is very similar, whatever may be the sort of meat roasted, whether joints, and the several species of fowl, or game. Fish is not usually dressed in this way, though the larger sorts are sometimes roasted. Those who relish eels and pike prefer them roasted to any other mode of dressing them. It is a general practice to move the spit back when the meat is half done, in order to clear the bottom part of the grate, and to give the fire a good stirring, that it may burn bright during the remainder of the process. The meat is deemed sufficiently roasted when the steam puffs out of the joint in jets towards the fire. To facilitate the process of roasting, a metal screen, consisting of a shallow concave reflector, is placed behind the meat, in order to reflect the rays of heat of the fire back again upon the meat. This greatly hastens the process. The screen is usually made of wood, lined with tin. It should be kept bright, otherwise, it will not reflect the rays of heat. ROASTING ON A STRING Is usually performed by means of the useful contrivance called a _bottle jack_, a well-known machine, so named from its form. It only serves for small joints, but does that better than the spit. It is cheap and simple, and the turning motion is produced by the twisting and untwisting of a string. The sort of roasting machine, called the _Poor Man’s Spit_, is something of the same nature, but still more simple. The meat is suspended by a skein of worsted, a twirling motion being given to the meat, the thread is twisted, and when the force is spent, the string untwists itself two or three times alternately, till the action being discontinued, the meat must again get a twirl round. When the meat is half done, the lower extremity of the joint is turned uppermost, and affixed to the string, so that the gravy flows over the joint the reverse way it did before. ROASTING IN AN OPEN OVEN. A Dutch or open oven is a machine for roasting small joints, such as fowls, &c. It consists of an arched box of tin open on one side, which side is placed against the fire. The joint being either suspended in the machine on a spit, or by a hook, or put on a low trevet placed on the bottom of the oven, which is moveable. The inside of the oven should be kept bright that it may reflect the heat of the fire. This is the most economical and most expeditious method of roasting in the small way. ROASTING IN A CLOSED OVEN.