How to become an inventor : $b Containing experiments in photography, hydraulics, galvanism and electricity, magnetism, heat, and the wonders of the microscopeWarford, Aaron A.
Science
How to become an inventor : $b Containing experiments in photography, hydraulics, galvanism and electricity, magnetism, heat, and the wonders of the microscope
Warford, Aaron A.
Scientific recreations
TO MAKE ARTIFICIAL MAGNETS WITHOUT THE AID EITHER OF NATURAL LOADSTONES
OR ARTIFICIAL MAGNETS.
Take an iron poker and tongs, or two bars of iron, the larger and the
older the better, and fixing the poker upright, hold to it with the
left hand near the top by a silk thread, a bar of soft steel about
three inches long, one-fourth of an inch broad and one-twentieth
thick; mark one end, and let this end be downwards. Then grasping the
tongs with the right hand a little below the middle, and keeping them
nearly in a vertical line, let the bar be rubbed with the lower end of
the tongs, from the marked end of the bar to its upper end about ten
times of each side of it. By this means the bar will receive as much
magnetism as will enable it to lift a small key at the marked end; and
this end of the bar being suspended by its middle, or made to rest on
a joint, will turn to the north, and is called its north pole, the
unmarked end being the south pole. This is the method recommended by
Mr. Caxton, in his process, which he regarded superior to those in
former use, and of which a more detailed account will be found in his
interesting volume.
HORSE-SHOE MAGNETS.
The form of a horse-shoe is generally given to magnetized bars, when
both poles are wanted to act together, which frequently happens in
various experiments, such as for lifting weights by the force of
magnetic attraction, and for magnetizing steel bars by the process of
double touch, for which they are exceedingly convenient. The following
is the method of making a powerful magnetic battery of the horse-shoe
form. Twelve bars or plates of steel are to be taken, and having
been previously bent to the required form, that is, the horse-shoe
shape, they are then bound together by means of rivets at their ends;
before being finally fastened they are each separately magnetized and
afterwards finally united.
Horse-shoe magnets should have a short bar of soft iron adapted to
connect the two poles, and should never be laid by without such a piece
of iron adhering to them. Bar magnets should be kept in pairs with
their poles turned in contrary directions, and they should be kept from
rust. Both kinds of magnets have their power not only preserved but
increased, by keeping them surrounded with a mass of dry filings of
soft iron, each particle of which will re-act by its induced magnetism
upon the point of the magnet to which it adheres, and maintain in that
point its primitive magnetic state.
EXPERIMENT TO SHOW THAT SOFT IRON POSSESSES MAGNETIC PROPERTIES WHILE
IT REMAINS IN THE VICINITY OF A MAGNET.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account