=Prussian Blue.=--This blue owes its colour to a combination of iron and ferrocyanogen. The commercial products vary very much in tint, depth of colour, covering power, and solubility. They are used for a variety of purposes, nearly all of which require the blue to have some property different from what it should have for other uses. For some purposes a green shade blue is wanted, for others a violet shade blue; some users want the blue to be soluble in water, others for it to be soluble in oxalic acid, others require it to be insoluble. Ordinary Prussian blue is insoluble in water, acids, and alkaline salts; bleaching powder has no action on it, and therefore it is largely used for tinting paper. It is capable of resisting acids; but alkalies, such as caustic soda, caustic potash, the carbonates of the same metals, lime and ammonia, decompose it, oxide of iron and a solution of a ferrocyanide of the alkali being formed, the decomposition being shown by a change of colour from blue to a reddish brown. On this account Prussian blues cannot be used for colouring soaps and alkaline products, or used as a pigment in distemper painting along with lime. The change of colour, from blue to brown, by the action of alkalies, distinguishes this blue from other blues. Prussian blues require to be tested for their solubility in oxalic acid, by taking about 20 gr. of the blue, mixing with 1 oz. of water and 20 gr. of oxalic acid, in which a good blue ought to dissolve completely. Some brands are soluble in strong hydrochloric acid while others are not. It is decomposed by boiling sulphuric acid, and turned green by boiling nitric acid. For all the ordinary uses of a pigment Prussian blue is quite durable, and possesses a depth of colour and a definite tint which is proof against the destructive agencies of light and air; and though its covering powers are not great, it is one of the most important blue pigments in use. When a salt of the higher oxide of iron is added to a solution of yellow prussiate of potash (or ferrocyanide of potassium) a blue compound is formed which is called Prussian blue. But this is not the method adopted for its commercial manufacture. In that case a ferrous salt, the proto-sulphate of iron, is added to a potassium ferrocyanide solution, the result of which is that a dirty bluish white precipitate is thrown down. On adding to this a little solution of bichromate of potash and sulphuric acid, the full deep blue is obtained. This is the industrial method of manufacturing Prussian blue.