_Yellow Prussiate._--The first step is the preparation of the yellow prussiate of potash. The manufacture of this substance, although an industry of considerable importance, is comparatively little understood, either from a scientific or a practical point of view. At all events, many prussiate makers seem completely at sea with regard to the most favourable conditions for carrying on the manufacture, and there can be no doubt that in many cases great waste occurs, through ignorance of the various reactions which take place during the process. The raw materials usually consist of carbonate of potash, iron filings or turnings, and organic matters containing carbon and nitrogen--such as dried blood, woollen rags, horn, hair, leather scraps, &c. The most suitable substances for use are, of course, those containing the largest proportion of nitrogen. The following are the percentages of nitrogen in various kinds of animal matter:-- Horn 15 to 17 Dried blood 15 to 17 Woollen rags 10 to 16 Sheep shearings 16 to 17 Calves’ hair 15 to 17 Bristles 9 to 10 Feathers 16 to 17 Hide clippings 4 to 5 Old shoes 6 to 7 Horn charcoal 2 to 7 Rag charcoal 2 to 12 Animal matters always contain more carbon than is necessary for the formation of cyanogen by combining with the nitrogen also present. Consequently, when such substances are heated with pearlash, the excess of carbon reduces a portion of the carbonate to the metallic state, and this potassium combines with the cyanogen to produce potassium cyanide. The manufacture of yellow prussiate of potash may be conveniently divided into three stages: (1) The production of the molten mass technically known as “metal”; (2) the lixiviation; and (3) the crystallisation.