Cyanide of potassium is added in excess to an acid solution of a copper salt until the red colour at first formed has disappeared, when a ferric salt is at once added. On the addition of the iron salt, of course, a copious precipitation of Prussian blue takes place, and the liquid again turns to a dark purple-red. To separate the colouring substance from the alkaline salts in the liquid, a dilute acid is added, which precipitates it and the cyanide of copper. This precipitate is combined with the Prussian blue, which also contains a considerable quantity of the colouring substance, and then treated with a boiling solution of carbonate of ammonia, in which it dissolves. As the cyanide of copper also goes into solution, it is separated by again precipitating it with an acid, and treating the precipitate with sulphuretted hydrogen. The colouring substance thus liberated now contains a certain amount of hydroferrocyanic acid, which is removed after neutralisation by acetate of lead. It is now filtered, and the purification is completed by precipitating with a silver salt and treating the precipitate with sulphuretted hydrogen. This purple-coloured compound crystallises very indistinctly. To determine its composition, Bong precipitated it with acetate of copper. When dried at 212° F., the rose-coloured precipitate had the following composition: Carbon 24·31, nitrogen 28·04, hydrogen 1·88, iron 13·66, copper 17·67, oxygen 14·44. Total 100·00. These numbers correspond to the formula Cu, Fe Cy_{4} (HO)_{4}.