The Manufacture of Paper: With Illustrations, and a Bibliography of Works Relating to Cellulose and Paper-MakingSindall, R. W. (Robert Walter)
History
The Manufacture of Paper: With Illustrations, and a Bibliography of Works Relating to Cellulose and Paper-Making
Sindall, R. W. (Robert Walter)
Papermaking
The second process for estimating cellulose is based upon the use
of bromine and ammonia. About ten grammes of the air-dried fibre is
placed in a well-stoppered wide-mouthed bottle with sufficient bromine
water to cover it. As the reaction proceeds the red solution gradually
decolourises, and further small additions of bromine are necessary. The
mass is then washed, and boiled in a flask connected to a condenser
with a strong solution of ammonia for about three to four hours. The
fibrous residue is washed, again treated with bromine water in the
cold, and subsequently boiled with ammonia. The alternative treatment
with bromine and ammonia is repeated until a white fibrous mass is
obtained.
In practice the paper-maker is confined to two or three methods for the
isolation of the fibres, viz., alkaline processes, which require the
digestion of the material with caustic soda, lime, lime and carbonate
of soda, chiefly applied to the boiling of rags, esparto, and similar
pecto-celluloses; acid processes, in which the material is digested
with sulphurous acid and sulphites. The latter methods are at present
almost exclusively used for the preparation of chemical wood pulp.
_Yields of Cellulose in the Paper Mill._--The object of the paper-maker
is to obtain a maximum yield of cellulose residue at a minimum of cost.
Usually the amount of actual bleached paper pulp obtained in the mill
is less than the percentage obtained by careful quantitative analysis,
for reasons easily understood.
In the first place, the raw material is digested for a stated period
with a carefully measured quantity of caustic soda, for example, at
a certain temperature. Now the conditions of boiling may be varied
by altering one or more of these factors, the period of boiling, the
strength of solution, or the steam pressure, and the paper-maker must
exercise his judgment in fixing the exact relation between the varying
factors so as to produce the best results.
In the second place, the mechanical devices for washing the boiled
pulp and for bleaching cause slight losses of fibre, which cannot be
altogether avoided when operations are conducted on a large scale.
Frequently, also, a greater yield of boiled material may involve
a larger quantity of bleaching powder, so that it is evident the
adjustment of practical conditions requires considerable technical
skill and experience.
The percentage of cellulose in the vegetable plants employed more or
less in the manufacture of paper is given in the following table:--
TABLE SHOWING PERCENTAGE OF CELLULOSE IN FIBROUS PLANTS.
Public-domain text, read in full here on John Shaqi.
Reviews
Reviews
No reviews yet
Be the first to share your thoughts on this work.
Join the Discussion
Join the discussion
Sign in to leave a comment or review.
Sign InorCreate an account